A smart chassis design that gives easy access to the battery and soundboard!
Introduction
-
Disclaimer
GOTH-3Designs cannot be held responsible for any mistakes made by DIYers during their install. You must have a good understanding of what you’re doing, of the components used and the safety measures associated to them. Always wear protective gear when working on install (gloves, eye protection, …), GOTH-3Designs cannot be held responsible in case of accident.
-
Note #1
Always use the smallest wires to make your install easier. There can be big differences between one wire type and another for the same AWG specs. PTFE Wires with the smallest OD are recommended such as those sold at The Saber Armory. A good wire management is also required, routing wires properly helps a lot saving space.
-
Note #2
3D printed parts can have very slight accuracy variations. In some rare cases, some sanding or hole deburring can be required. Additionally, metal parts can arrive a bit bent, but are normally easy to bend back into shape. Consult the FAQ if you encounter issues with parts that cannot be solved easily.