Welcome to the Lightsabers & Props page!

Here you can browse through the best Lightsabers and other Star Wars Props for DIY, where to find them and how to build them. You can use the filters on the left to help finding the items you’re looking for. Stay tuned, more content, sabers and props will be added continuously to this page!


 
  • Custom DIY Sabers
    Custom DIY Sabers

    Custom DIY Sabers



    Custom DIY Sabers

    Out of the hilts listed on the page, there are a lot of other custom sabers available for DIY. The Custom Saber Shop was the first to propose to build your own custom saber with a varied choice of parts. Other big companies (like UltraSabers, Saberforge, …) as well as smaller ones (OxWork, …) also propose various empty hilts.

    While we can’t do a specific chassis for all the sabers out there, we propose a wide selection of chassis modules that help to install empty hilts. The 1st step is always the same, measure the ID and length of your hilt and browse the shop sections for the corresponding GCM size => Hilt ID = Chassis OD -0.01″ (for example with 1.25″ID MHS parts, the corresponding chassis modules are 1.24″OD). The length of each module is also in the item description so that you can plan accordingly.

    Browse our Shapeways shop!

    • Manufacturers: Other
    • Movies: Other / Custom
    • Factions: Other
    • Availabilities: Available
  • Graflex (Vintage / Replica)
    Graflex (Vintage / Replica)

    Graflex (Vintage / Replica)



    Graflex (Vintage / Replica) - Featured Image Graflex (Vintage / Replica) - Gallery Image 2 Graflex (Vintage / Replica) - Gallery Image 3 Graflex (Vintage / Replica) - Gallery Image 4 Graflex (Vintage / Replica) - Gallery Image 5 Graflex (Vintage / Replica) - Gallery Image 6 Graflex (Vintage / Replica) - Gallery Image 7 Graflex (Vintage / Replica) - Gallery Image 8 Graflex (Vintage / Replica) - Gallery Image 9 Graflex (Vintage / Replica) - Gallery Image 10
    Graflex (Vintage / Replica) - Featured Image Graflex (Vintage / Replica) - Gallery Image 2 Graflex (Vintage / Replica) - Gallery Image 3 Graflex (Vintage / Replica) - Gallery Image 4 Graflex (Vintage / Replica) - Gallery Image 5 Graflex (Vintage / Replica) - Gallery Image 6 Graflex (Vintage / Replica) - Gallery Image 7 Graflex (Vintage / Replica) - Gallery Image 8 Graflex (Vintage / Replica) - Gallery Image 9 Graflex (Vintage / Replica) - Gallery Image 10

    The Graflex is the most iconic Lightsaber in the Star Wars universe! Transmitted from generation to generation, it’s a key component in all the saga.

    Constructed from an antique Graflex Camera flashgun, saber enthusiasts are used to convert these Vintage flashes or Replicas into Litghsabers, with the different styles appearing in EpIV, EPV or EpVII. Such conversions are fairly easy, look into the Chassis and DIY instructions to know how, and find the necessary components to do it!

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: The Graflex Shop, Roman, Other
    • Movies: Episode IV, Episode V, Episode VII
    • Factions: Jedi
    • Availabilities: Available
     
    Learn more
  • Graflex 2.0 Kit (Parks)
    Graflex 2.0 Kit (Parks)

    Graflex 2.0 Kit (Parks)



    Graflex 2.0 Kit (Parks) - Featured Image Graflex 2.0 Kit (Parks) - Gallery Image 2 Graflex 2.0 Kit (Parks) - Gallery Image 3 Graflex 2.0 Kit (Parks) - Gallery Image 4 Graflex 2.0 Kit (Parks) - Gallery Image 5 Graflex 2.0 Kit (Parks) - Gallery Image 6 Graflex 2.0 Kit (Parks) - Gallery Image 7 Graflex 2.0 Kit (Parks) - Gallery Image 8 Graflex 2.0 Kit (Parks) - Gallery Image 9 Graflex 2.0 Kit (Parks) - Gallery Image 10
    Graflex 2.0 Kit (Parks) - Featured Image Graflex 2.0 Kit (Parks) - Gallery Image 2 Graflex 2.0 Kit (Parks) - Gallery Image 3 Graflex 2.0 Kit (Parks) - Gallery Image 4 Graflex 2.0 Kit (Parks) - Gallery Image 5 Graflex 2.0 Kit (Parks) - Gallery Image 6 Graflex 2.0 Kit (Parks) - Gallery Image 7 Graflex 2.0 Kit (Parks) - Gallery Image 8 Graflex 2.0 Kit (Parks) - Gallery Image 9 Graflex 2.0 Kit (Parks) - Gallery Image 10

    The Graflex is the most iconic Lightsaber in the Star Wars universe! Transmitted from generation to generation, it’s a key component in all the saga.

    In 2016 following Episode VIII, Parks Sabers manufactured a new DIY Kit, allowing to choose between the different styles appearing in EpIV, EPV or EpVII. These kits became very popular, also thanks to GOTH-3Designs chassis and install instructions available through the link below.

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: Parks / Korbanth
    • Movies: Episode IV, Episode V, Episode VII
    • Factions: Jedi
    • Availabilities: Available
     
    Learn more
  • Luke Hero (KR-Sabers)
    Luke Hero (KR-Sabers)

    Luke Hero (KR-Sabers)



    Luke Hero (KR-Sabers) - Featured Image Luke Hero (KR-Sabers) - Gallery Image 2 Luke Hero (KR-Sabers) - Gallery Image 3 Luke Hero (KR-Sabers) - Gallery Image 4 Luke Hero (KR-Sabers) - Gallery Image 5 Luke Hero (KR-Sabers) - Gallery Image 6 Luke Hero (KR-Sabers) - Gallery Image 7 Luke Hero (KR-Sabers) - Gallery Image 8 Luke Hero (KR-Sabers) - Gallery Image 9 Luke Hero (KR-Sabers) - Gallery Image 10
    Luke Hero (KR-Sabers) - Featured Image Luke Hero (KR-Sabers) - Gallery Image 2 Luke Hero (KR-Sabers) - Gallery Image 3 Luke Hero (KR-Sabers) - Gallery Image 4 Luke Hero (KR-Sabers) - Gallery Image 5 Luke Hero (KR-Sabers) - Gallery Image 6 Luke Hero (KR-Sabers) - Gallery Image 7 Luke Hero (KR-Sabers) - Gallery Image 8 Luke Hero (KR-Sabers) - Gallery Image 9 Luke Hero (KR-Sabers) - Gallery Image 10

    Symbol of completing his Jedi training, Luke Skywalker constructed this lightsaber right before the start of Star Wars The Return of the Jedi.

    This replica is the Hero version of Luke’s ROTJ Lightsaber and it has been created by KR-Sabers in collaboration with One Replica. This is a high quality hilt and it requires some intermediate skills to be built using GOTH-3designs Chassis. Click on the button below to see the chassis available for it:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: KR-Sabers
    • Movies: Episode VI
    • Factions: Jedi
    • Availabilities: Limited Runs
     
    Learn more
  • Luke V2 (NerfworXlab)
    Luke V2 (NerfworXlab)

    Luke V2 (NerfworXlab)



    Luke V2 (NerfworXlab) - Featured Image Luke V2 (NerfworXlab) - Gallery Image 2 Luke V2 (NerfworXlab) - Gallery Image 3 Luke V2 (NerfworXlab) - Gallery Image 4 Luke V2 (NerfworXlab) - Gallery Image 5 Luke V2 (NerfworXlab) - Gallery Image 6 Luke V2 (NerfworXlab) - Gallery Image 7 Luke V2 (NerfworXlab) - Gallery Image 8 Luke V2 (NerfworXlab) - Gallery Image 9 Luke V2 (NerfworXlab) - Gallery Image 10
    Luke V2 (NerfworXlab) - Featured Image Luke V2 (NerfworXlab) - Gallery Image 2 Luke V2 (NerfworXlab) - Gallery Image 3 Luke V2 (NerfworXlab) - Gallery Image 4 Luke V2 (NerfworXlab) - Gallery Image 5 Luke V2 (NerfworXlab) - Gallery Image 6 Luke V2 (NerfworXlab) - Gallery Image 7 Luke V2 (NerfworXlab) - Gallery Image 8 Luke V2 (NerfworXlab) - Gallery Image 9 Luke V2 (NerfworXlab) - Gallery Image 10

    Symbol of completing his Jedi training, Luke Skywalker constructed this lightsaber right before the start of Star Wars The Return of the Jedi.

    This version is the “V2” of Skywalker ROTJ Lightsaber, notably used during his duel with Vader. This replica is one of the closest accurate to the original prop, based of the pictures released during SW Celebration 2015. Produced by the collaborative group NerfworXlab (in which GOTH-3designs is a member),  it is the best and most install friendly Luke V2 available. Check the DIY instructions below to learn how:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: NerfworXlab
    • Movies: Episode VI
    • Factions: Jedi
    • Availabilities: Available
     
    Learn more
  • Kylo Ren (Phoenix Props)
    Kylo Ren (Phoenix Props)

    Kylo Ren (Phoenix Props)



    Kylo Ren (Phoenix Props)

    Kylo Ren’s Lightsaber as seen in Episode VII and VIII.

    This DIY saber kit manufactured by Phoenix Props and really gives justice to this unusual cross-guard saber.

    Check out the available chassis and build instructions by clicking on the Build Your Own button below!

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: Phoenix Props
    • Movies: Episode VII, Episode VIII
    • Factions: Sith
    • Availabilities: Limited Runs
  • Kit Fisto (KR-Sabers)
    Kit Fisto (KR-Sabers)

    Kit Fisto (KR-Sabers)



    Kit Fisto (KR-Sabers)

    Clan hilts by KR-Sabers. High quality replicas of Kit Fisto’s lightsaber.

    Perfect hilt for DIY beginners as well as collectors, they are quite easy to install using our 3D printed chassis. Click on the button below to see the chassis available for it:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: KR-Sabers
    • Movies: Episode I, Episode II, Episode III, Clone Wars
    • Factions: Jedi
    • Availabilities: Limited Runs
  • Shaak / Barriss (KR-Sabers)
    Shaak / Barriss (KR-Sabers)

    Shaak / Barriss (KR-Sabers)



    Shaak / Barriss (KR-Sabers)

    Clan hilts by KR-Sabers. High quality replicas of Adi Gallia/Shaak Ti and Barriss Offee lightsabers.

    Perfect hilts for DIY beginners as well as collectors, they are quite easy to install using our 3D printed chassis. Click on the button below to see the chassis available for it:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: KR-Sabers
    • Movies: Episode II, Episode III
    • Factions: Jedi
    • Availabilities: Limited Runs
  • Luminara / Plo (KR-Sabers)
    Luminara / Plo (KR-Sabers)

    Luminara / Plo (KR-Sabers)



    Luminara / Plo (KR-Sabers)

    Clan hilts by KR-Sabers. High quality replicas of Plo Koon and Luminara Andulli lightsabers.

    They both have the same structure and can be quite easily installed using GOTH-3designs Chassis, making them good hilts for beginners as well as collectors. Click on the button below to see the chassis available for it:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: KR-Sabers
    • Movies: Episode II, Episode III
    • Factions: Jedi
    • Availabilities: Limited Runs
  • Ki-Adi Mundi (KR-Sabers)
    Ki-Adi Mundi (KR-Sabers)

    Ki-Adi Mundi (KR-Sabers)



    Ki-Adi Mundi (KR-Sabers)

    Clan hilts by KR-Sabers. High quality replicas of Ki-Adi Mundi lightsaber.

    Perfect hilts for DIY beginners as well as collectors, they are quite easy to install using our 3D printed chassis. Click on the button below to see the chassis available for it:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: KR-Sabers
    • Movies: Episode I, Episode II, Episode III
    • Factions: Jedi
    • Availabilities: Limited Runs
  • Ki-Adi Mundi (Ox Works)
    Ki-Adi Mundi (Ox Works)

    Ki-Adi Mundi (Ox Works)



    Ki-Adi Mundi (Ox Works)

    Coming soon!

    • Manufacturers: Ox Works
    • Movies: Episode I, Episode II, Episode III
    • Factions: Jedi
    • Availabilities: Limited Runs
  • Satele Shan (Helv’tica)
    Satele Shan (Helv’tica)

    Satele Shan (Helv’tica)



    Satele Shan (Helv’tica)

    From the MMORPG Star Wars The Old Republic, here is Satele Shan lightsaber.

    This DIY saber staff kit manufactured by Helv’tica Customs is simply beautiful, with etched patterns on the body and sturdy construction.

    Check out the available chassis and build instructions by clicking on the Build Your Own button below!

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: Helv'tica Customs
    • Movies: Expanded Universe
    • Factions: Jedi
    • Availabilities: Limited Runs
     
    Learn more
  • Corran Horn (NerfworXlab)
    Corran Horn (NerfworXlab)

    Corran Horn (NerfworXlab)



    Corran Horn (NerfworXlab)

    Corran Horn is a character of the Star Wars Expanded Universe (Legends) known from the Novel “I Jedi” to have built his own lightsaber out of a Speeder Bike handle.

    NerforXlab designed this hilt as a perfect replica, both inspired by the speeder bikes from Return of the Jedi, and the description of the components from the Novel. Very small and impressive hilt to hold, it is also rather easy to build as DIY using a dedicated GOTH-3Designs All.In.One chassis, available for Plecter Labs CFPrizm or Naigon EC I2.

    Only available through limited quantities. 2017 Interest Thread

    • Manufacturers: NerfworXlab
    • Movies: Expanded Universe
    • Factions: Jedi
    • Availabilities: Limited Runs
     
    Learn more
  • Rey’s Blaster (NerfworXlab)
    Rey’s Blaster (NerfworXlab)

    Rey’s Blaster (NerfworXlab)



    Rey’s Blaster (NerfworXlab) - Featured Image Rey’s Blaster (NerfworXlab) - Gallery Image 2 Rey’s Blaster (NerfworXlab) - Gallery Image 3 Rey’s Blaster (NerfworXlab) - Gallery Image 4 Rey’s Blaster (NerfworXlab) - Gallery Image 5 Rey’s Blaster (NerfworXlab) - Gallery Image 6 Rey’s Blaster (NerfworXlab) - Gallery Image 7 Rey’s Blaster (NerfworXlab) - Gallery Image 8 Rey’s Blaster (NerfworXlab) - Gallery Image 9 Rey’s Blaster (NerfworXlab) - Gallery Image 10
    Rey’s Blaster (NerfworXlab) - Featured Image Rey’s Blaster (NerfworXlab) - Gallery Image 2 Rey’s Blaster (NerfworXlab) - Gallery Image 3 Rey’s Blaster (NerfworXlab) - Gallery Image 4 Rey’s Blaster (NerfworXlab) - Gallery Image 5 Rey’s Blaster (NerfworXlab) - Gallery Image 6 Rey’s Blaster (NerfworXlab) - Gallery Image 7 Rey’s Blaster (NerfworXlab) - Gallery Image 8 Rey’s Blaster (NerfworXlab) - Gallery Image 9 Rey’s Blaster (NerfworXlab) - Gallery Image 10

    Rey’s blaster as seen in the Star Wars – The Force Awakens.

    This NN-14 blaster pistol DIY kit as been developed by the collaborative group NerfworXlab (in which GOTH-3Designs is member), and is a high quality replica as well as install friendly using the chassis kit available. Find out more by clicking on the “build” button below.

    Build your own!Contact a builder

    • Manufacturers: NerfworXlab
    • Movies: Episode VII
    • Factions: Other
    • Availabilities: Limited Runs
     
    Learn more
  • Ahsoka TCW (NerfworXlab)
    Ahsoka TCW (NerfworXlab)

    Ahsoka TCW (NerfworXlab)



    Ahsoka TCW (NerfworXlab)

    Ahsoka Tano was a Padawan who first appeared in The Clone Wars TV series, as apprentice of Anakin Skywalker.

    At some point during the Clone Wars, she was seen carrying 2 lightsabers, her main green bladed saber and a shoto with a yellow-green blade. NerfworXlab collaborative group (in which GOTH-3Designs is member) created a very accurate replica of both large and shoto hilts based on the TV show design. These hilts are also very install friendly and suitable for beginners using the specific chassis designed for them. Learn how with the DIY Instructions by clicking on the button below:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: NerfworXlab
    • Movies: Clone Wars
    • Factions: Jedi
    • Availabilities: Available
  • Ahsoka Rebels (KR-Sabers)
    Ahsoka Rebels (KR-Sabers)

    Ahsoka Rebels (KR-Sabers)



    Ahsoka Rebels (KR-Sabers)

    As seen in Star Wars Rebels Season 2, these are replicas of Ahsoka Tano lightsabers. They has been created by KR-Sabers in collaboration with One Replica, and is available through limited runs only. These hilts are pretty particular as they have a curved body shape.

    GOTH-3designs has created a custom chassis that fits perfectly this curved to make the install very easy, making them also a great choice for beginners. Check the install instruction by clicking on the button below:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: KR-Sabers
    • Movies: Rebels
    • Factions: Jedi
    • Availabilities: Limited Runs
     
    Learn more
  • Ezra Bridger (NerfworXlab)
    Ezra Bridger (NerfworXlab)

    Ezra Bridger (NerfworXlab)



    Ezra Bridger (NerfworXlab)

    Ezra Bridger’s lightsaber as seen in Star Wars RebelsSeason 3.

    WIP – you can pre-order this hilt, please read the thread linked below:

    Limited Run Thread

    • Manufacturers: NerfworXlab
    • Movies: Rebels
    • Factions: Jedi
    • Availabilities: Coming soon
  • Kanan Jarrus (NerfworXlab)
    Kanan Jarrus (NerfworXlab)

    Kanan Jarrus (NerfworXlab)



    Kanan Jarrus (NerfworXlab)

    Kanan Jarrus’ lightsaber as seen in Star Wars Rebels.

    WIP – you can pre-order this hilt, please read the thread linked below:

    Limited Run Thread

    • Manufacturers: NerfworXlab
    • Movies: Rebels
    • Factions: Jedi
    • Availabilities: Coming soon
  • Darksaber (NerfworXlab)
    Darksaber (NerfworXlab)

    Darksaber (NerfworXlab)



    Darksaber (NerfworXlab)

    Mandolorian Darksaber as seen in Star Wars The Clone Wars and Star Wars Rebels.

    WIP – you can subscribe in the interest thread linked below:

    Interest Thread

    • Manufacturers: NerfworXlab
    • Movies: Clone Wars, Rebels
    • Factions: Other
    • Availabilities: Coming soon
  • Darth Vader MPP2.0 (Parks)
    Darth Vader MPP2.0 (Parks)

    Darth Vader MPP2.0 (Parks)



    Darth Vader MPP2.0 (Parks)

    Darth Vader’s Lightsaber as seen in Episode IV and V.

    This DIY saber kit manufactured by Parks and widely sold by various source (TCSS, Korbanth, …) permits to choose between EpIV or EpV styles as shown in the picture.

    Check out the available chassis and build instructions by clicking on the Build Your Own button below!

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: Parks / Korbanth
    • Movies: Episode IV, Episode V, Rebels, Rogue One
    • Factions: Sith
    • Availabilities: Available
     
    Learn more
  • Darth Vader DV6 (Parks)
    Darth Vader DV6 (Parks)

    Darth Vader DV6 (Parks)



    Darth Vader DV6 (Parks)

    Darth Vader’s Lightsaber as seen in Episode VI.

    This version manufactured by Parks and widely sold by various source (TCSS, Korbanth, …) is well built and accessible for beginners.

    Check out the available chassis and build instructions by clicking on the Build Your Own button below!

    BUILD YOUR OWN!Contact a builder

     

    • Manufacturers: Parks / Korbanth
    • Movies: Episode VI
    • Factions: Sith
    • Availabilities: Available
     
    Learn more
  • Qui-Gon Jinn (KR-Sabers)
    Qui-Gon Jinn (KR-Sabers)

    Qui-Gon Jinn (KR-Sabers)



    Qui-Gon Jinn (KR-Sabers) - Featured Image Qui-Gon Jinn (KR-Sabers) - Gallery Image 2 Qui-Gon Jinn (KR-Sabers) - Gallery Image 3 Qui-Gon Jinn (KR-Sabers) - Gallery Image 4 Qui-Gon Jinn (KR-Sabers) - Gallery Image 5 Qui-Gon Jinn (KR-Sabers) - Gallery Image 6 Qui-Gon Jinn (KR-Sabers) - Gallery Image 7 Qui-Gon Jinn (KR-Sabers) - Gallery Image 8
    Qui-Gon Jinn (KR-Sabers) - Featured Image Qui-Gon Jinn (KR-Sabers) - Gallery Image 2 Qui-Gon Jinn (KR-Sabers) - Gallery Image 3 Qui-Gon Jinn (KR-Sabers) - Gallery Image 4 Qui-Gon Jinn (KR-Sabers) - Gallery Image 5 Qui-Gon Jinn (KR-Sabers) - Gallery Image 6 Qui-Gon Jinn (KR-Sabers) - Gallery Image 7 Qui-Gon Jinn (KR-Sabers) - Gallery Image 8

    As seen in Episode I, here is a replica of Jedi Master Qui-Gon Jinn lightsaber. This hilt has been created by KR-Sabers in collaboration with One Replica, and is available through limited runs. It has the particularity to present accurate deep grooves in its body.

    GOTH-3designs has created a custom chassis accordingly to make the install easy, making this hilt also good for beginners. Check the install instruction by clicking on the button below:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: KR-Sabers
    • Movies: Episode I
    • Factions: Jedi
    • Availabilities: Limited Runs
     
    Learn more
  • Obi-Wan OWK (Parks)
    Obi-Wan OWK (Parks)

    Obi-Wan OWK (Parks)



    Obi-Wan OWK (Parks)

    This hilt is a replica of Obi-Wan’s lightsaber as seen in Episode I – The Phentom Menace.

    This kit has been created by Parks and despite a quite small internal space, is easy to build for beginners using our chassis. Learn how to build your own by clicking on the button below:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: Parks / Korbanth
    • Movies: Episode I
    • Factions: Jedi
    • Availabilities: Available
     
    Learn more
  • Obi-Wan K4 (Parks)
    Obi-Wan K4 (Parks)

    Obi-Wan K4 (Parks)



    Obi-Wan K4 (Parks)

    One of the 3 main lightsabers that defined Star Wars, here is a replica of Obi-Wan’s lightsaber as seen in Episode IV – A New Hope (and SW Rebels series).

    This kit has been created by Parks and despite a quite small internal space, is easy to build for beginners using our chassis. This hilt isn’t meant for heaving dueling, but is a nice display piece. Learn how to build your own by clicking on the button below:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: Parks / Korbanth
    • Movies: Episode IV
    • Factions: Jedi
    • Availabilities: Available
     
    Learn more
  • Obi-Wan MK1 (Roman)
    Obi-Wan MK1 (Roman)

    Obi-Wan MK1 (Roman)



    Obi-Wan MK1 (Roman)

    Also called MK1 FX Kit by its manufacturer Roman Props, this is a very high quality replica prop of Obi-Wan’s lightsaber as seen in Episode IV – A New Hope (and SW Rebels series).

    While the hilt isn’t meant for heaving dueling, it a beautiful collector lightsaber for display / show piece. Learn how to build your own by clicking on the button below:

    BUILD YOUR OWN!Contact a builder

     

    • Manufacturers: Roman
    • Movies: Episode IV, Rebels
    • Factions: Jedi
    • Availabilities: Available
     
    Learn more
  • Obi-Wan Inception (Roman)
    Obi-Wan Inception (Roman)

    Obi-Wan Inception (Roman)



    Obi-Wan Inception (Roman) - Featured Image Obi-Wan Inception (Roman) - Gallery Image 2 Obi-Wan Inception (Roman) - Gallery Image 3 Obi-Wan Inception (Roman) - Gallery Image 4 Obi-Wan Inception (Roman) - Gallery Image 5 Obi-Wan Inception (Roman) - Gallery Image 6 Obi-Wan Inception (Roman) - Gallery Image 7 Obi-Wan Inception (Roman) - Gallery Image 8 Obi-Wan Inception (Roman) - Gallery Image 9 Obi-Wan Inception (Roman) - Gallery Image 10
    Obi-Wan Inception (Roman) - Featured Image Obi-Wan Inception (Roman) - Gallery Image 2 Obi-Wan Inception (Roman) - Gallery Image 3 Obi-Wan Inception (Roman) - Gallery Image 4 Obi-Wan Inception (Roman) - Gallery Image 5 Obi-Wan Inception (Roman) - Gallery Image 6 Obi-Wan Inception (Roman) - Gallery Image 7 Obi-Wan Inception (Roman) - Gallery Image 8 Obi-Wan Inception (Roman) - Gallery Image 9 Obi-Wan Inception (Roman) - Gallery Image 10

    Also called INCEPTION by its manufacturer Roman Props, this is a very high quality replica prop of Obi-Wan’s lightsaber as seen in Episode III – The Revenge of the Sith (and The Clone Wars series).

    While the hilt isn’t meant for dueling, it makes an easy to build DIY lightsaber for a very nice display / show piece. Learn how to build your own by clicking on the button below:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: Roman
    • Movies: Episode III, Clone Wars
    • Factions: Jedi
    • Availabilities: Available
  • Kylo Ren (Parks)
    Kylo Ren (Parks)

    Kylo Ren (Parks)



    Kylo Ren (Parks)
    • Manufacturers: Parks / Korbanth
    • Movies: Episode VII, Episode VIII
    • Factions: Sith
    • Availabilities: Coming soon
  • Luke LS6 (Parks)
    Luke LS6 (Parks)

    Luke LS6 (Parks)



    Luke LS6 (Parks)
    • Manufacturers: Parks / Korbanth
    • Movies: Episode VI
    • Factions: Jedi
    • Availabilities: Coming soon
  • Luke V3 (Rudy Pando)
    Luke V3 (Rudy Pando)

    Luke V3 (Rudy Pando)



    Luke V3 (Rudy Pando)

    Coming soon!

    • Manufacturers: Other
    • Movies: Episode VI
    • Factions: Jedi
    • Availabilities: Limited Runs

Loading...
Facebook Messenger for Wordpress