Graflex Grand Master – Complete DIY Kit Replica

1.899,00

Only 2 left in stock

This is a complete DIY kit.
It include a KR-Sabers Graflex Replica flashgun, a complete chassis and all electronic components to install it. (see list below)

Notes:
– Tools to perform the conversion are not supplied.
– This is an expert level build, for experienced installers. By buying you acknowledge having read this page entirely.
– Neopixel blade not included.
– Removable Keepower batteries not included (due to shipping restrictions).

Please read our Terms and Conditions.

Shipping: will ship in 2 to 5 weeks.

Return policy: No return accepted on this item.

 


 

Parts included in this kit:
– Vintage Graflex Flashgun in good condition (see pictures)
– Complete Grand Master Chassis parts, including blade holder and 2 crystals.
All metal parts in natural brass to be weathered, except Part16 in copper.
– 1 x Crystal Focus 10 MK2 soundboard
– 1 x OLED Screen
– 1 x Bluetooth board
– 1 x Motor
– 1 x set of resistors (4)
– 1 x KR 3W 28mm Bass Speaker
– 1 x KR Shtok ECO NPXL Connector (hilt side)
– 1 x NPXL Connector holder
– 5 X single pixel accents
– 1 x High Amp Kill Switch
– 2 x blade holder switches
– 1 x 3mm red accent LED
– 7 x 0804 pre-wired SMD LEDs
– 1 x BT kill switch
– 10 x 3mmOD 2mm thick
– 34 x 2mmOD 2mm thick
– 30 x 2mmOD 1mm thick
– 2 x Battery contacts
– 2 x Bulgin Pins 10A (Male and Female)
– 6 x Bulgin Pins 1A (Male and Female)
– 2 x set of Mill-Max pins and socket (10 each)
– 1 x set of M2 screws (6)
– 1 x set of 4-40 screws (2)
– 1 x 4-40 brass threaded rod
– 3 x 4-40 hex nuts
– 1 x set of various tubes (brass and aluminium 4mmOD, copper and brass 2mmOD, copper1mmOD)
– 1 x set of rods (brass 1.5mmOD, nickel 1mmOD)