- Chassis' parts
- Other Parts
Diy empty hilts :
This chassis will hold the following components:
-
-
Plecter Labs CFX
(+ adapters)
see exemple - ProffiBoard see exemple
-
Plecter Labs CFX
-
-
Battery Contacts
For removable 18650 battery
see exemple
-
Battery Contacts
-
- 28mm Bass Speaker see exemple
-
- High Amp Kill Switch see exemple
-
-
Included in the chassis (SWC short pins)
For SWC V2 or V3 Short Pins PCB
-
Included in the chassis (SWC short pins)
-
- 2020 pixel strips see exemple
- Single Pixel 5050 see exemple
-
- 2mm x 1mm magnets see exemple
- 2mm x 2mm Magnets see exemple
-
- 4mmOD Hex Nuts
- 4-40 Threaded Rods & Hex Nuts
- 1.5mmOD Rods
- 4mmOD Tubes
- 3mmOD Tubes