Bienvenu sur la page Lightsabers & Props!

Vous pouvez parcourir ici les meilleurs Sabres Laser, ainsi que d’autres répliques Star Wars à monter sois-même, où les trouver et comment les construire en utilisant nos modèles de châssis imprimés en 3D. Vous pouvez utiliser les filtres à gauche pour affiner votre recherche. Revenez consulter cette page, nous ajoutons souvent de nouveaux modèles!


 
  • Graflex (Vintage / Replica)
    Graflex (Vintage / Replica)

    Graflex (Vintage / Replica)



    Graflex (Vintage / Replica) - Featured Image Graflex (Vintage / Replica) - Gallery Image 2 Graflex (Vintage / Replica) - Gallery Image 3 Graflex (Vintage / Replica) - Gallery Image 4 Graflex (Vintage / Replica) - Gallery Image 5 Graflex (Vintage / Replica) - Gallery Image 6 Graflex (Vintage / Replica) - Gallery Image 7 Graflex (Vintage / Replica) - Gallery Image 8 Graflex (Vintage / Replica) - Gallery Image 9 Graflex (Vintage / Replica) - Gallery Image 10
    Graflex (Vintage / Replica) - Featured Image Graflex (Vintage / Replica) - Gallery Image 2 Graflex (Vintage / Replica) - Gallery Image 3 Graflex (Vintage / Replica) - Gallery Image 4 Graflex (Vintage / Replica) - Gallery Image 5 Graflex (Vintage / Replica) - Gallery Image 6 Graflex (Vintage / Replica) - Gallery Image 7 Graflex (Vintage / Replica) - Gallery Image 8 Graflex (Vintage / Replica) - Gallery Image 9 Graflex (Vintage / Replica) - Gallery Image 10

    The Graflex is the most iconic Lightsaber in the Star Wars universe! Transmitted from generation to generation, it’s a key component in all the saga.

    Constructed from an antique Graflex Camera flashgun, saber enthusiasts are used to convert these Vintage flashes or Replicas into Litghsabers, with the different styles appearing in EpIV, EPV or EpVII. Such conversions are fairly easy, look into the Chassis and DIY instructions to know how, and find the necessary components to do it!

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: The Graflex Shop, Roman, Other
    • Movies: Episode IV, Episode V, Episode VII, Episode VIII
    • Factions: Jedi
    • Availabilities: Available
     
    Learn more
  • Graflex 2.5 (Korbanth)
    Graflex 2.5 (Korbanth)

    Graflex 2.5 (Korbanth)



    Graflex 2.5 (Korbanth) - Featured Image Graflex 2.5 (Korbanth) - Gallery Image 2 Graflex 2.5 (Korbanth) - Gallery Image 3 Graflex 2.5 (Korbanth) - Gallery Image 4 Graflex 2.5 (Korbanth) - Gallery Image 5 Graflex 2.5 (Korbanth) - Gallery Image 6 Graflex 2.5 (Korbanth) - Gallery Image 7 Graflex 2.5 (Korbanth) - Gallery Image 8 Graflex 2.5 (Korbanth) - Gallery Image 9 Graflex 2.5 (Korbanth) - Gallery Image 10
    Graflex 2.5 (Korbanth) - Featured Image Graflex 2.5 (Korbanth) - Gallery Image 2 Graflex 2.5 (Korbanth) - Gallery Image 3 Graflex 2.5 (Korbanth) - Gallery Image 4 Graflex 2.5 (Korbanth) - Gallery Image 5 Graflex 2.5 (Korbanth) - Gallery Image 6 Graflex 2.5 (Korbanth) - Gallery Image 7 Graflex 2.5 (Korbanth) - Gallery Image 8 Graflex 2.5 (Korbanth) - Gallery Image 9 Graflex 2.5 (Korbanth) - Gallery Image 10

    The Graflex is the most iconic Lightsaber in the Star Wars universe! Transmitted from generation to generation, it’s a key component in all the saga.

    In 2016 following Episode VIII, Parks Sabers manufactured a new DIY Kit, allowing to choose between the different styles appearing in EpIV, EPV or EpVII. These kits became very popular, also thanks to GOTH-3Designs chassis and install instructions available through the link below.

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: Korbanth
    • Movies: Episode IV, Episode V, Episode VII, Episode VIII
    • Factions: Jedi
    • Availabilities: Available
     
    Learn more
  • Ezra Bridger (NerfworXlab)
    Ezra Bridger (NerfworXlab)

    Ezra Bridger (NerfworXlab)



    Ezra Bridger (NerfworXlab)

    Ezra Bridger’s second lightsaber as seen in Star Wars Rebels Season 3.

    This replica DIY kit has been designed and produced by the group NerfworXlab (in which GOTH-3Designs is member). It is an accurate and easy to build hilt, which offers a chassis core reveal. learn how to build it by clicking on the link below:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: NerfworXlab
    • Movies: Rebels
    • Factions: Jedi
    • Availabilities: Available
     
    Learn more
  • Kanan Jarrus (NerfworXlab)
    Kanan Jarrus (NerfworXlab)

    Kanan Jarrus (NerfworXlab)



    Kanan Jarrus (NerfworXlab)

    Kanan Jarrus’ lightsaber as seen in the TV Series Star Wars Rebels.

    This replica DIY kit has been designed and produced by the group NerfworXlab (in which GOTH-3Designs is member). It is an accurate and easy to build hilt, which offers a full chassis core reveal. learn how to build it by clicking on the link below:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: NerfworXlab
    • Movies: Rebels
    • Factions: Jedi
    • Availabilities: Available
     
    Learn more
  • Satele Shan (Helv’tica)
    Satele Shan (Helv’tica)

    Satele Shan (Helv’tica)



    Satele Shan (Helv’tica)

    From the MMORPG Star Wars The Old Republic, here is Satele Shan lightsaber.

    This DIY saber staff kit manufactured by Helv’tica Customs is simply beautiful, with etched patterns on the body and sturdy construction.

    Check out the available chassis and build instructions by clicking on the Build Your Own button below!

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: Helv'tica Customs
    • Movies: Expanded Universe
    • Factions: Jedi
    • Availabilities: Limited Runs
     
    Learn more
  • Kit Fisto (KR-Sabers)
    Kit Fisto (KR-Sabers)

    Kit Fisto (KR-Sabers)



    Kit Fisto (KR-Sabers)

    Clan hilts by KR-Sabers. High quality replicas of Kit Fisto’s lightsaber.

    Perfect hilt for DIY beginners as well as collectors, they are quite easy to install using our 3D printed chassis. Click on the button below to see the chassis available for it:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: KR-Sabers
    • Movies: Episode I, Episode II, Episode III, Clone Wars
    • Factions: Jedi
    • Availabilities: Limited Runs
  • Shaak / Barriss (KR-Sabers)
    Shaak / Barriss (KR-Sabers)

    Shaak / Barriss (KR-Sabers)



    Shaak / Barriss (KR-Sabers)

    Clan hilts by KR-Sabers. High quality replicas of Adi Gallia/Shaak Ti and Barriss Offee lightsabers.

    Perfect hilts for DIY beginners as well as collectors, they are quite easy to install using our 3D printed chassis. Click on the button below to see the chassis available for it:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: KR-Sabers
    • Movies: Episode II, Episode III
    • Factions: Jedi
    • Availabilities: Limited Runs
  • Luminara / Plo (KR-Sabers)
    Luminara / Plo (KR-Sabers)

    Luminara / Plo (KR-Sabers)



    Luminara / Plo (KR-Sabers)

    Clan hilts by KR-Sabers. High quality replicas of Plo Koon and Luminara Andulli lightsabers.

    They both have the same structure and can be quite easily installed using GOTH-3designs Chassis, making them good hilts for beginners as well as collectors. Click on the button below to see the chassis available for it:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: KR-Sabers
    • Movies: Episode II, Episode III
    • Factions: Jedi
    • Availabilities: Limited Runs
  • Ki-Adi Mundi (KR-Sabers)
    Ki-Adi Mundi (KR-Sabers)

    Ki-Adi Mundi (KR-Sabers)



    Ki-Adi Mundi (KR-Sabers)

    Clan hilts by KR-Sabers. High quality replicas of Ki-Adi Mundi lightsaber.

    Perfect hilts for DIY beginners as well as collectors, they are quite easy to install using our 3D printed chassis. Click on the button below to see the chassis available for it:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: KR-Sabers
    • Movies: Episode I, Episode II, Episode III
    • Factions: Jedi
    • Availabilities: Limited Runs
  • Ahsoka TCW (NerfworXlab)
    Ahsoka TCW (NerfworXlab)

    Ahsoka TCW (NerfworXlab)



    Ahsoka TCW (NerfworXlab)

    Ahsoka Tano was a Padawan who first appeared in The Clone Wars TV series, as apprentice of Anakin Skywalker.

    At some point during the Clone Wars, she was seen carrying 2 lightsabers, her main green bladed saber and a shoto with a yellow-green blade. NerfworXlab collaborative group (in which GOTH-3Designs is member) created a very accurate replica of both large and shoto hilts based on the TV show design. These hilts are also very install friendly and suitable for beginners using the specific chassis designed for them. Learn how with the DIY Instructions by clicking on the button below:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: NerfworXlab
    • Movies: Clone Wars
    • Factions: Jedi
    • Availabilities: After Market
  • Ahsoka Rebels (KR-Sabers)
    Ahsoka Rebels (KR-Sabers)

    Ahsoka Rebels (KR-Sabers)



    Ahsoka Rebels (KR-Sabers)

    As seen in Star Wars Rebels Season 2, these are replicas of Ahsoka Tano lightsabers. They has been created by KR-Sabers in collaboration with One Replica, and is available through limited runs only. These hilts are pretty particular as they have a curved body shape.

    GOTH-3designs has created a custom chassis that fits perfectly this curved to make the install very easy, making them also a great choice for beginners. Check the install instruction by clicking on the button below:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: KR-Sabers
    • Movies: Rebels
    • Factions: Jedi
    • Availabilities: Limited Runs
     
    Learn more
  • Obi-Wan OWK (Korbanth)
    Obi-Wan OWK (Korbanth)

    Obi-Wan OWK (Korbanth)



    Obi-Wan OWK (Korbanth)

    This hilt is a replica of Obi-Wan’s lightsaber as seen in Episode I – The Phentom Menace.

    This kit has been created by Parks and despite a quite small internal space, is easy to build for beginners using our chassis. Learn how to build your own by clicking on the button below:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: Korbanth
    • Movies: Episode I
    • Factions: Jedi
    • Availabilities: Available
     
    Learn more
  • Obi-Wan K4 (Korbanth)
    Obi-Wan K4 (Korbanth)

    Obi-Wan K4 (Korbanth)



    Obi-Wan K4 (Korbanth)

    One of the 3 main lightsabers that defined Star Wars, here is a replica of Obi-Wan’s lightsaber as seen in Episode IV – A New Hope (and SW Rebels series).

    This kit has been created by Parks and despite a quite small internal space, is easy to build for beginners using our chassis. This hilt isn’t meant for heaving dueling, but is a nice display piece. Learn how to build your own by clicking on the button below:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: Korbanth
    • Movies: Episode IV
    • Factions: Jedi
    • Availabilities: Available
     
    Learn more
  • Obi-Wan MK1 (Roman)
    Obi-Wan MK1 (Roman)

    Obi-Wan MK1 (Roman)



    Obi-Wan MK1 (Roman)

    Also called MK1 FX Kit by its manufacturer Roman Props, this is a very high quality replica prop of Obi-Wan’s lightsaber as seen in Episode IV – A New Hope (and SW Rebels series).

    While the hilt isn’t meant for heaving dueling, it a beautiful collector lightsaber for display / show piece. Learn how to build your own by clicking on the button below:

    BUILD YOUR OWN!Contact a builder

     

    • Manufacturers: Roman
    • Movies: Episode IV, Rebels
    • Factions: Jedi
    • Availabilities: Available
     
    Learn more
  • Obi-Wan Inception (Roman)
    Obi-Wan Inception (Roman)

    Obi-Wan Inception (Roman)



    Obi-Wan Inception (Roman) - Featured Image Obi-Wan Inception (Roman) - Gallery Image 2 Obi-Wan Inception (Roman) - Gallery Image 3 Obi-Wan Inception (Roman) - Gallery Image 4 Obi-Wan Inception (Roman) - Gallery Image 5 Obi-Wan Inception (Roman) - Gallery Image 6 Obi-Wan Inception (Roman) - Gallery Image 7 Obi-Wan Inception (Roman) - Gallery Image 8 Obi-Wan Inception (Roman) - Gallery Image 9 Obi-Wan Inception (Roman) - Gallery Image 10
    Obi-Wan Inception (Roman) - Featured Image Obi-Wan Inception (Roman) - Gallery Image 2 Obi-Wan Inception (Roman) - Gallery Image 3 Obi-Wan Inception (Roman) - Gallery Image 4 Obi-Wan Inception (Roman) - Gallery Image 5 Obi-Wan Inception (Roman) - Gallery Image 6 Obi-Wan Inception (Roman) - Gallery Image 7 Obi-Wan Inception (Roman) - Gallery Image 8 Obi-Wan Inception (Roman) - Gallery Image 9 Obi-Wan Inception (Roman) - Gallery Image 10

    Also called INCEPTION by its manufacturer Roman Props, this is a very high quality replica prop of Obi-Wan’s lightsaber as seen in Episode III – The Revenge of the Sith (and The Clone Wars series).

    While the hilt isn’t meant for dueling, it makes an easy to build DIY lightsaber for a very nice display / show piece. Learn how to build your own by clicking on the button below:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: Roman
    • Movies: Episode III, Clone Wars
    • Factions: Jedi
    • Availabilities: Available
  • Luke V4 Balance (Roman)
    Luke V4 Balance (Roman)

    Luke V4 Balance (Roman)



    Luke V4 Balance (Roman)

    WORK IN PROGRESS

    • Manufacturers: Roman
    • Movies: Episode VI, Episode VIII
    • Factions: Jedi
    • Availabilities: Available
  • Luke Hero (KR-Sabers)
    Luke Hero (KR-Sabers)

    Luke Hero (KR-Sabers)



    Luke Hero (KR-Sabers) - Featured Image Luke Hero (KR-Sabers) - Gallery Image 2 Luke Hero (KR-Sabers) - Gallery Image 3 Luke Hero (KR-Sabers) - Gallery Image 4 Luke Hero (KR-Sabers) - Gallery Image 5 Luke Hero (KR-Sabers) - Gallery Image 6 Luke Hero (KR-Sabers) - Gallery Image 7 Luke Hero (KR-Sabers) - Gallery Image 8 Luke Hero (KR-Sabers) - Gallery Image 9 Luke Hero (KR-Sabers) - Gallery Image 10
    Luke Hero (KR-Sabers) - Featured Image Luke Hero (KR-Sabers) - Gallery Image 2 Luke Hero (KR-Sabers) - Gallery Image 3 Luke Hero (KR-Sabers) - Gallery Image 4 Luke Hero (KR-Sabers) - Gallery Image 5 Luke Hero (KR-Sabers) - Gallery Image 6 Luke Hero (KR-Sabers) - Gallery Image 7 Luke Hero (KR-Sabers) - Gallery Image 8 Luke Hero (KR-Sabers) - Gallery Image 9 Luke Hero (KR-Sabers) - Gallery Image 10

    Symbol of completing his Jedi training, Luke Skywalker constructed this lightsaber right before the start of Star Wars The Return of the Jedi.

    This replica is the Hero version of Luke’s ROTJ Lightsaber and it has been created by KR-Sabers in collaboration with One Replica. This is a high quality hilt and it requires some intermediate skills to be built using GOTH-3designs Chassis. Click on the button below to see the chassis available for it:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: KR-Sabers
    • Movies: Episode VI
    • Factions: Jedi
    • Availabilities: Limited Runs
     
    Learn more
  • Luke V2 (NerfworXlab)
    Luke V2 (NerfworXlab)

    Luke V2 (NerfworXlab)



    Luke V2 (NerfworXlab) - Featured Image Luke V2 (NerfworXlab) - Gallery Image 2 Luke V2 (NerfworXlab) - Gallery Image 3 Luke V2 (NerfworXlab) - Gallery Image 4 Luke V2 (NerfworXlab) - Gallery Image 5 Luke V2 (NerfworXlab) - Gallery Image 6 Luke V2 (NerfworXlab) - Gallery Image 7 Luke V2 (NerfworXlab) - Gallery Image 8 Luke V2 (NerfworXlab) - Gallery Image 9 Luke V2 (NerfworXlab) - Gallery Image 10
    Luke V2 (NerfworXlab) - Featured Image Luke V2 (NerfworXlab) - Gallery Image 2 Luke V2 (NerfworXlab) - Gallery Image 3 Luke V2 (NerfworXlab) - Gallery Image 4 Luke V2 (NerfworXlab) - Gallery Image 5 Luke V2 (NerfworXlab) - Gallery Image 6 Luke V2 (NerfworXlab) - Gallery Image 7 Luke V2 (NerfworXlab) - Gallery Image 8 Luke V2 (NerfworXlab) - Gallery Image 9 Luke V2 (NerfworXlab) - Gallery Image 10

    Symbol of completing his Jedi training, Luke Skywalker constructed this lightsaber right before the start of Star Wars The Return of the Jedi.

    This version is the « V2 » of Skywalker ROTJ Lightsaber, notably used during his duel with Vader. This replica is one of the closest accurate to the original prop, based of the pictures released during SW Celebration 2015. Produced by the collaborative group NerfworXlab (in which GOTH-3designs is a member),  it is the best and most install friendly Luke V2 available. Check the DIY instructions below to learn how:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: NerfworXlab
    • Movies: Episode VI
    • Factions: Jedi
    • Availabilities: Available
     
    Learn more
  • Luke V3 (Rudy Pando)
    Luke V3 (Rudy Pando)

    Luke V3 (Rudy Pando)



    Luke V3 (Rudy Pando)

    Coming soon!

    • Manufacturers: Other
    • Movies: Episode VI
    • Factions: Jedi
    • Availabilities: Limited Runs
  • Luke LS6-GW (Korbanth)
    Luke LS6-GW (Korbanth)

    Luke LS6-GW (Korbanth)



    Luke LS6-GW (Korbanth)

    Symbol of completing his Jedi training, Luke Skywalker constructed this lightsaber right before the start of Star Wars The Return of the Jedi.

    This DIY kit from Parks / Korbanth allows you to build either the Hero version or V2 version of Luke’s ROTJ Lightsaber. Click on the button below to see the chassis available for it:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: Korbanth
    • Movies: Episode VI
    • Factions: Jedi
    • Availabilities: Available
     
    Learn more
  • Yoda Y3 (Korbanth)
    Yoda Y3 (Korbanth)

    Yoda Y3 (Korbanth)



    Yoda Y3 (Korbanth)

    Work in progress (2018 version) – ETA TBD

     

    • Manufacturers: Korbanth
    • Movies: Episode II, Episode III, Clone Wars
    • Factions: Jedi
    • Availabilities: Coming soon
  • Qui-Gon Jinn (KR-Sabers)
    Qui-Gon Jinn (KR-Sabers)

    Qui-Gon Jinn (KR-Sabers)



    Qui-Gon Jinn (KR-Sabers) - Featured Image Qui-Gon Jinn (KR-Sabers) - Gallery Image 2 Qui-Gon Jinn (KR-Sabers) - Gallery Image 3 Qui-Gon Jinn (KR-Sabers) - Gallery Image 4 Qui-Gon Jinn (KR-Sabers) - Gallery Image 5 Qui-Gon Jinn (KR-Sabers) - Gallery Image 6 Qui-Gon Jinn (KR-Sabers) - Gallery Image 7 Qui-Gon Jinn (KR-Sabers) - Gallery Image 8
    Qui-Gon Jinn (KR-Sabers) - Featured Image Qui-Gon Jinn (KR-Sabers) - Gallery Image 2 Qui-Gon Jinn (KR-Sabers) - Gallery Image 3 Qui-Gon Jinn (KR-Sabers) - Gallery Image 4 Qui-Gon Jinn (KR-Sabers) - Gallery Image 5 Qui-Gon Jinn (KR-Sabers) - Gallery Image 6 Qui-Gon Jinn (KR-Sabers) - Gallery Image 7 Qui-Gon Jinn (KR-Sabers) - Gallery Image 8

    (NEW PRODUCTION RUN PLANNED IN FALL 2018)

    As seen in Episode I, here is a replica of Jedi Master Qui-Gon Jinn lightsaber. This hilt has been created by KR-Sabers in collaboration with One Replica, and is available through limited runs. It has the particularity to present accurate deep grooves in its body.

    GOTH-3designs has created a custom chassis accordingly to make the install easy, making this hilt also good for beginners. Check the install instruction by clicking on the button below:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: KR-Sabers
    • Movies: Episode I
    • Factions: Jedi
    • Availabilities: After Market
     
    Learn more

Loading...
Facebook Messenger for Wordpress