¡Bienvenido a la página de Lightsabers & Props!

Aquí puedes navegar a través de los mejores sables de luz y otros accesorios de Star Wars a montar su mismo, dónde encontrarlos y cómo construirlos con nuestros chasis y accesorios impresos en 3D. Puedes usar los filtros de la izquierda para ayudarte a encontrar los artículos que estás buscando. Más contenido, sables y accesorios se agregarán continuamente a esta página.


 
  • Custom DIY Sabers
    Custom DIY Sabers

    Custom DIY Sabers



    Custom DIY Sabers

    Out of the hilts listed on the page, there are a lot of other custom sabers or modular parts available for DIY. The Custom Saber Shop was the first to propose to build your own custom saber with a varied choice of parts. Other big companies (like UltraSabers, Saberforge, …) as well as smaller ones (OxWork, …) also propose various empty hilts.

    While we can’t do a specific chassis for all the sabers out there, we propose a wide selection of GOTH Chassis Modules that help to install empty hilts.

    Browse our Shapeways shop!

    The 1st step is always the same, measure the ID and length of your hilt and browse the shop sections for the corresponding module size => Chassis OD = Hilt ID -0.01″ (for example with 1.25″ID MHS parts, the corresponding chassis modules are 1.24″OD). The length of each module is also in the item description so that you can plan accordingly.

    • Manufacturers: Other
    • Movies: Other / Custom
    • Factions: Other
    • Availabilities: Available
  • Graflex (Vintage / Replica)
    Graflex (Vintage / Replica)

    Graflex (Vintage / Replica)



    Graflex (Vintage / Replica) - Featured Image Graflex (Vintage / Replica) - Gallery Image 2 Graflex (Vintage / Replica) - Gallery Image 3 Graflex (Vintage / Replica) - Gallery Image 4 Graflex (Vintage / Replica) - Gallery Image 5 Graflex (Vintage / Replica) - Gallery Image 6 Graflex (Vintage / Replica) - Gallery Image 7 Graflex (Vintage / Replica) - Gallery Image 8 Graflex (Vintage / Replica) - Gallery Image 9 Graflex (Vintage / Replica) - Gallery Image 10
    Graflex (Vintage / Replica) - Featured Image Graflex (Vintage / Replica) - Gallery Image 2 Graflex (Vintage / Replica) - Gallery Image 3 Graflex (Vintage / Replica) - Gallery Image 4 Graflex (Vintage / Replica) - Gallery Image 5 Graflex (Vintage / Replica) - Gallery Image 6 Graflex (Vintage / Replica) - Gallery Image 7 Graflex (Vintage / Replica) - Gallery Image 8 Graflex (Vintage / Replica) - Gallery Image 9 Graflex (Vintage / Replica) - Gallery Image 10

    The Graflex is the most iconic Lightsaber in the Star Wars universe! Transmitted from generation to generation, it’s a key component in all the saga.

    Constructed from an antique Graflex Camera flashgun, saber enthusiasts are used to convert these Vintage flashes or Replicas into Litghsabers, with the different styles appearing in EpIV, EPV or EpVII. Such conversions are fairly easy, look into the Chassis and DIY instructions to know how, and find the necessary components to do it!

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: The Graflex Shop, Roman, Other
    • Movies: Episode IV, Episode V, Episode VII, Episode VIII
    • Factions: Jedi
    • Availabilities: Available
     
    Learn more
  • Graflex (89 Sabers)
    Graflex (89 Sabers)

    Graflex (89 Sabers)



    Graflex (89 Sabers)

    The Graflex is the most iconic Lightsaber in the Star Wars universe! Transmitted from generation to generation, it’s a key component in all the saga.

    The particular high quality replica from 89 Sabers has a different internal construction compared to other manufacturers, and as such has dedicated GOTH-3Designs chassis and install instructions available through the link below.

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: KR-Sabers
    • Movies: Episode IV, Episode V, Episode VII, Episode VIII
    • Factions: Jedi
    • Availabilities: Available
     
    Learn more
  • Graflex 2.5 (Korbanth)
    Graflex 2.5 (Korbanth)

    Graflex 2.5 (Korbanth)



    Graflex 2.5 (Korbanth) - Featured Image Graflex 2.5 (Korbanth) - Gallery Image 2 Graflex 2.5 (Korbanth) - Gallery Image 3 Graflex 2.5 (Korbanth) - Gallery Image 4 Graflex 2.5 (Korbanth) - Gallery Image 5 Graflex 2.5 (Korbanth) - Gallery Image 6 Graflex 2.5 (Korbanth) - Gallery Image 7 Graflex 2.5 (Korbanth) - Gallery Image 8 Graflex 2.5 (Korbanth) - Gallery Image 9 Graflex 2.5 (Korbanth) - Gallery Image 10
    Graflex 2.5 (Korbanth) - Featured Image Graflex 2.5 (Korbanth) - Gallery Image 2 Graflex 2.5 (Korbanth) - Gallery Image 3 Graflex 2.5 (Korbanth) - Gallery Image 4 Graflex 2.5 (Korbanth) - Gallery Image 5 Graflex 2.5 (Korbanth) - Gallery Image 6 Graflex 2.5 (Korbanth) - Gallery Image 7 Graflex 2.5 (Korbanth) - Gallery Image 8 Graflex 2.5 (Korbanth) - Gallery Image 9 Graflex 2.5 (Korbanth) - Gallery Image 10

    The Graflex is the most iconic Lightsaber in the Star Wars universe! Transmitted from generation to generation, it’s a key component in all the saga.

    In 2016 following Episode VIII, Parks Sabers manufactured a new DIY Kit, allowing to choose between the different styles appearing in EpIV, EPV or EpVII. These kits became very popular, also thanks to GOTH-3Designs chassis and install instructions available through the link below.

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: Korbanth
    • Movies: Episode IV, Episode V, Episode VII, Episode VIII
    • Factions: Jedi
    • Availabilities: Available
     
    Learn more
  • Ezra Bridger (NerfworXlab)
    Ezra Bridger (NerfworXlab)

    Ezra Bridger (NerfworXlab)



    Ezra Bridger (NerfworXlab)

    Ezra Bridger’s second lightsaber as seen in Star Wars Rebels Season 3.

    This replica DIY kit has been designed and produced by the group NerfworXlab (in which GOTH-3Designs is member). It is an accurate and easy to build hilt, which offers a chassis core reveal. learn how to build it by clicking on the link below:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: NerfworXlab
    • Movies: Rebels
    • Factions: Jedi
    • Availabilities: Available
     
    Learn more
  • Kanan Jarrus (NerfworXlab)
    Kanan Jarrus (NerfworXlab)

    Kanan Jarrus (NerfworXlab)



    Kanan Jarrus (NerfworXlab)

    Kanan Jarrus’ lightsaber as seen in the TV Series Star Wars Rebels.

    This replica DIY kit has been designed and produced by the group NerfworXlab (in which GOTH-3Designs is member). It is an accurate and easy to build hilt, which offers a full chassis core reveal. learn how to build it by clicking on the link below:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: NerfworXlab
    • Movies: Rebels
    • Factions: Jedi
    • Availabilities: Available
     
    Learn more
  • KRS Flagship (KR-Sabers)
    KRS Flagship (KR-Sabers)

    KRS Flagship (KR-Sabers)



    KRS Flagship (KR-Sabers)

    This a full custom KR-Sabers hilt, available in either aluminium or brass.

    It is a great hilt for DIY beginners as well as collectors, and will be quite easy to install using our 3D printed chassis. Click on the button below to see the chassis available for it:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: KR-Sabers
    • Movies: Other / Custom
    • Factions: Other
    • Availabilities: Available
  • Vader MPP2.0 (Korbanth)
    Vader MPP2.0 (Korbanth)

    Vader MPP2.0 (Korbanth)



    Vader MPP2.0 (Korbanth)

    Darth Vader’s Lightsaber as seen in Episode IV and V.

    This DIY saber kit manufactured by Parks and widely sold by various source (TCSS, Korbanth, …) permits to choose between EpIV or EpV styles as shown in the picture.

    Check out the available chassis and build instructions by clicking on the Build Your Own button below!

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: Korbanth
    • Movies: Episode IV, Episode V, Rebels, Rogue One
    • Factions: Sith
    • Availabilities: Available
     
    Learn more
  • Vader DV6 (Korbanth)
    Vader DV6 (Korbanth)

    Vader DV6 (Korbanth)



    Vader DV6 (Korbanth)

    Darth Vader’s Lightsaber as seen in Episode VI.

    This version manufactured by Parks and widely sold by various source (TCSS, Korbanth, …) is well built and accessible for beginners.

    Check out the available chassis and build instructions by clicking on the Build Your Own button below!

    BUILD YOUR OWN!Contact a builder

     

    • Manufacturers: Korbanth
    • Movies: Episode VI
    • Factions: Sith
    • Availabilities: Available
     
    Learn more
  • Crossguard 2.0 (Korbanth)
    Crossguard 2.0 (Korbanth)

    Crossguard 2.0 (Korbanth)



    Crossguard 2.0 (Korbanth)

    Kylo Ren’s Lightsaber as seen in Episode VII and VIII.

    This DIY saber kit sold by Korbanth and feature a removable side plate to reveal a crystal chamber or easy removable battery for Neopixel install. Check out the available chassis and build instructions by clicking on the Build Your Own button below!

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: Korbanth
    • Movies: Episode VII, Episode VIII
    • Factions: Sith
    • Availabilities: Available
  • Obi-Wan OWK (Korbanth)
    Obi-Wan OWK (Korbanth)

    Obi-Wan OWK (Korbanth)



    Obi-Wan OWK (Korbanth)

    This hilt is a replica of Obi-Wan’s lightsaber as seen in Episode I – The Phentom Menace.

    This kit has been created by Parks and despite a quite small internal space, is easy to build for beginners using our chassis. Learn how to build your own by clicking on the button below:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: Korbanth
    • Movies: Episode I
    • Factions: Jedi
    • Availabilities: Available
     
    Learn more
  • Obi-Wan K4 (Korbanth)
    Obi-Wan K4 (Korbanth)

    Obi-Wan K4 (Korbanth)



    Obi-Wan K4 (Korbanth)

    One of the 3 main lightsabers that defined Star Wars, here is a replica of Obi-Wan’s lightsaber as seen in Episode IV – A New Hope (and SW Rebels series).

    This kit has been created by Parks and despite a quite small internal space, is easy to build for beginners using our chassis. This hilt isn’t meant for heaving dueling, but is a nice display piece. Learn how to build your own by clicking on the button below:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: Korbanth
    • Movies: Episode IV
    • Factions: Jedi
    • Availabilities: Available
     
    Learn more
  • Obi-Wan MK1 (Roman)
    Obi-Wan MK1 (Roman)

    Obi-Wan MK1 (Roman)



    Obi-Wan MK1 (Roman)

    Also called MK1 FX Kit by its manufacturer Roman Props, this is a very high quality replica prop of Obi-Wan’s lightsaber as seen in Episode IV – A New Hope (and SW Rebels series).

    While the hilt isn’t meant for heaving dueling, it a beautiful collector lightsaber for display / show piece. Learn how to build your own by clicking on the button below:

    BUILD YOUR OWN!Contact a builder

     

    • Manufacturers: Roman
    • Movies: Episode IV, Rebels
    • Factions: Jedi
    • Availabilities: Available
     
    Learn more
  • Obi-Wan Inception (Roman)
    Obi-Wan Inception (Roman)

    Obi-Wan Inception (Roman)



    Obi-Wan Inception (Roman) - Featured Image Obi-Wan Inception (Roman) - Gallery Image 2 Obi-Wan Inception (Roman) - Gallery Image 3 Obi-Wan Inception (Roman) - Gallery Image 4 Obi-Wan Inception (Roman) - Gallery Image 5 Obi-Wan Inception (Roman) - Gallery Image 6 Obi-Wan Inception (Roman) - Gallery Image 7 Obi-Wan Inception (Roman) - Gallery Image 8 Obi-Wan Inception (Roman) - Gallery Image 9 Obi-Wan Inception (Roman) - Gallery Image 10
    Obi-Wan Inception (Roman) - Featured Image Obi-Wan Inception (Roman) - Gallery Image 2 Obi-Wan Inception (Roman) - Gallery Image 3 Obi-Wan Inception (Roman) - Gallery Image 4 Obi-Wan Inception (Roman) - Gallery Image 5 Obi-Wan Inception (Roman) - Gallery Image 6 Obi-Wan Inception (Roman) - Gallery Image 7 Obi-Wan Inception (Roman) - Gallery Image 8 Obi-Wan Inception (Roman) - Gallery Image 9 Obi-Wan Inception (Roman) - Gallery Image 10

    Also called INCEPTION by its manufacturer Roman Props, this is a very high quality replica prop of Obi-Wan’s lightsaber as seen in Episode III – The Revenge of the Sith (and The Clone Wars series).

    While the hilt isn’t meant for dueling, it makes an easy to build DIY lightsaber for a very nice display / show piece. Learn how to build your own by clicking on the button below:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: Roman
    • Movies: Episode III, Clone Wars
    • Factions: Jedi
    • Availabilities: Available
  • Luke V4 Balance (Roman)
    Luke V4 Balance (Roman)

    Luke V4 Balance (Roman)



    Luke V4 Balance (Roman)

    WORK IN PROGRESS

    • Manufacturers: Roman
    • Movies: Episode VI, Episode VIII
    • Factions: Jedi
    • Availabilities: Available
  • Luke V2 (NerfworXlab)
    Luke V2 (NerfworXlab)

    Luke V2 (NerfworXlab)



    Luke V2 (NerfworXlab) - Featured Image Luke V2 (NerfworXlab) - Gallery Image 2 Luke V2 (NerfworXlab) - Gallery Image 3 Luke V2 (NerfworXlab) - Gallery Image 4 Luke V2 (NerfworXlab) - Gallery Image 5 Luke V2 (NerfworXlab) - Gallery Image 6 Luke V2 (NerfworXlab) - Gallery Image 7 Luke V2 (NerfworXlab) - Gallery Image 8 Luke V2 (NerfworXlab) - Gallery Image 9 Luke V2 (NerfworXlab) - Gallery Image 10
    Luke V2 (NerfworXlab) - Featured Image Luke V2 (NerfworXlab) - Gallery Image 2 Luke V2 (NerfworXlab) - Gallery Image 3 Luke V2 (NerfworXlab) - Gallery Image 4 Luke V2 (NerfworXlab) - Gallery Image 5 Luke V2 (NerfworXlab) - Gallery Image 6 Luke V2 (NerfworXlab) - Gallery Image 7 Luke V2 (NerfworXlab) - Gallery Image 8 Luke V2 (NerfworXlab) - Gallery Image 9 Luke V2 (NerfworXlab) - Gallery Image 10

    Symbol of completing his Jedi training, Luke Skywalker constructed this lightsaber right before the start of Star Wars The Return of the Jedi.

    This version is the “V2” of Skywalker ROTJ Lightsaber, notably used during his duel with Vader. This replica is one of the closest accurate to the original prop, based of the pictures released during SW Celebration 2015. Produced by the collaborative group NerfworXlab (in which GOTH-3designs is a member),  it is the best and most install friendly Luke V2 available. Check the DIY instructions below to learn how:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: NerfworXlab
    • Movies: Episode VI
    • Factions: Jedi
    • Availabilities: Available
     
    Learn more
  • Luke LS6-GW (Korbanth)
    Luke LS6-GW (Korbanth)

    Luke LS6-GW (Korbanth)



    Luke LS6-GW (Korbanth)

    Symbol of completing his Jedi training, Luke Skywalker constructed this lightsaber right before the start of Star Wars The Return of the Jedi.

    This DIY kit from Parks / Korbanth allows you to build either the Hero version or V2 version of Luke’s ROTJ Lightsaber. Click on the button below to see the chassis available for it:

    BUILD YOUR OWN!Contact a builder

    • Manufacturers: Korbanth
    • Movies: Episode VI
    • Factions: Jedi
    • Availabilities: Available
     
    Learn more
  • Maul DM1 (Korbanth)
    Maul DM1 (Korbanth)

    Maul DM1 (Korbanth)



    Maul DM1 (Korbanth)

    Work in progress (2018 version) – ETA TBD

     

    • Manufacturers: Korbanth
    • Movies: Episode I, Clone Wars
    • Factions: Sith
    • Availabilities: Available

Loading...
Facebook Messenger for Wordpress