Chassis summary:

Grand MasterWIPInterest Thread.
MentorAvailable – DIY Instructions.
Master – Available – DIY Instructions.
KnightAvailableDIY Instructions.
PadawanAvailable  DIY Instructions.

Shapeways Shop Section ⇒ C1.1 – Graflex Vintage and C1.2 – Graflex Mentor


 

GRAND MASTER – Interest Thread
Limited Editions chassis only available through NerfworXlab!

 


 

MENTOR – DIY Instructions and parts details

High end and complex chassis assembly for the best crystal chamber and core reveal, with a majority of metal parts.

Variant 1:

EpVIII Special Edition chassis:
Reveal-X: Extend your chassis to reveal the focusing crystal, without removing the whole chassis core. The Chassis locks and unlocks using magnets. That’s not all, it uses Magnetik Cover Plates as well, to be removable and reveal what’s “under the hood”
Rotating Crystal Chamber to power the Primary Kyber crystal – motorized and fully controllable.


Prices: From $230 (depending on materials used) – approx $600 with the metal parts in recommended materials.
Install Level: Expert

Variant 2:

While retaining the overall design aspect, this chassis is a more simple version of the Variant 1 above.
It doesn’t have the Reveal-X and Rotating Chamber features but is much faster and also easier to install.
It also allows the usage of bigger batteries thanks to the additional free space (no motor) and thus supports Neopixel blades.

WORK IN PROGRESS

Prices: From $230 (depending on materials used) – approx $600 with the metal parts in recommended materials.
Install Level: Advanced

 


 

MASTER – DIY Instructions and parts details
Detailed chassis with metal Shells and Crystal Chamber. DIY kit with various parts to assemble.
The Crystal Chamber is available in 2 different Styles (with or without Power Gate).
Compatible with all soundboards with the “MutliBoards Adaptive Chassis” card.

Style 1: The Crystal Chamber contains a Power Gate to focus the energy between the crystals

Style 2: Open crystal chamber without Power Gate.

Prices: From $200 (depending on materials used) – approx $290 with steel shell and brass CC inserts.
Install Level: Intermediate

 


 

KNIGHT – DIY Instructions and parts details

Variant 1:

Multi-parts chassis including crystal chamber. Cheaper solution (plastic, can be painted) for a very nice reveal still.
Compatible with all soundboards with the “MutliBoards Adaptive Chassis” card.
Note that the Speaker module and rotatable cover of Variant 2 can be used with Variant 1 .

Prices: Approx $95
Install Level: Beginner

Variant 2:

Similar to K1 in its overall structure, this mutli-parts chassis allow to print Crystal Chamber inserts in metal materials. It also feature a cover cap to hide the SD card, and a rotatable back cover to hide the recharge port access.
Compatible with all soundboards with the “MutliBoards Adaptive Chassis” card.
Note that the Speaker module of Variant 1 can be used with Variant 2 .

Prices: From $140 (depending on materials used) – approx $220 with brass/bronze CC inserts.
Can also be printed in plastic (and painted) to lower the cost.
Install Level: Intermediate

 


 

PADAWAN – DIY Instructions and parts details
All-in-1 chassis for simple and budget install.
Compatible with all soundboards with the “MutliBoards Adaptive Chassis” card.. Optional module for CEx

Prices: Approx $60
Install Level: Beginner

Loading...
Facebook Messenger for Wordpress