Index:

=> Parts Details
=> Demo
=> Quick Install Guides


Parts Details:

1- 3D printed Chassis parts:

Shapeways Shop Section ⇒ C7 – Korbanth

Padawan Chassis

Prices: Depends on the material and Shapeways current rates – add the part into the cart to estimate final cost
Install Level: Beginner
Variant 1:18650 battery, 2.1mm recharge port, 28mm bass speaker, MultiBoards Adaptive Chassis (NB, Prizm, Proffie, I3, CF9).
=> Padawan Var1: korbanth-skinnyflex-padawan-chassis-var1
– Variant 2: Keystone 18650 battery holder, kill switch, 28mm bass speaker, MultiBoards Adaptive Chassis (NB, Prizm, Proffie, I3).
=> Padawan Var2: korbanth-skinnyflex-padawan-chassis-var2

ECO Chassis or PIY File

Prices: Check the links below
Install Level: Beginner
Variant 1: 18650 battery, 2.1mm recharge port, 28mm bass speaker, for ProffieBoard, NB, Prizm or Universal.
=> ECO Chassis Var1: goth-3d-korbanth-skinnyflex-variant-1-fdm-eco-chassis
=> PIY File Var1: goth-3d-korbanth-skinnyflex-variant-1-fdm-chassis-stl-file
Variant 2: Keystone 18650 battery holder, kill switch, 28mm bass speaker, for ProffieBoard, NB, Prizm or Universal.
=> ECO Chassis Var2: goth-3d-korbanth-skinnyflex-variant-2-fdm-eco-chassis
=> PIY File Var2: goth-3d-korbanth-skinnyflex-variant-2-fdm-chassis-stl-file

Master Chassis

Prices: Depends on the material and Shapeways current rates – add the part into the cart to estimate final cost
Install Level: Intermediate

Work in progress

2- Additional chassis parts:
Most of the chassis parts needed for our chassis are available at The Saber Armory.
Local hobby stores or online store (as well as eBay) are a good source for parts.
You can also be inventive and add any custom parts, wire mesh, paint job or else to your chassis to give it an unique look!

3- DIY empty hilts:

 Available on Korbanth website

4- Electronic components and blades:
Saber electronic components are basically more or less similar from one saber to another. You’ll need a main Led, a Battery, a recharge port, one or two switches, a soundboard, accent leds, a speaker and wires. Then the blade is the last part of your saber, they are usually made from PolyCarbonate tubes + tip.
You can find most of what you’ll need at The Saber Armory. Some components can also be found at The Saber Bay on Etsy. Local electronic shops or online stores like Digikey are also a good source.

 


Demo –  Master Chassis:

Work in progress

Back to top

 


Quick Install Guide – Master Chassis: 

Back to top
(step by step)

Disclainer:
– These instructions will details the install procedure as much as possible. GOTH-3Designs cannot be held responsible for any mistakes made by DIYers.
– Always wear protective gear when working on install (gloves, eye protection, …), GOTH-3Designs cannot be held responsible in case of accident.

Use small wires to make your install easier
=> for Tri-cree install 30awg for main wires and 32awg  for accent leds and switches are highly recommended
=> for Neopixel PTFE 24awg for main wires (battery and led strip + and -), and 32awg  for accent leds and switches are highly recommended

WORK IN PROGRESS

.

Back to top

Loading...
Facebook Messenger for Wordpress