Parts Details:

1- 3D printed Chassis parts:

Shapeways Shop Section ⇒ C7 – Korbanth

Padawan Chassis

Prices: Depends on the material and Shapeways current rates – add the part into the cart to estimate final cost
Install Level: Beginner
– For 21700 battery, 2.1mm recharge port, 28mm bass speaker, MultiBoards Adaptive Chassis (NB, Prizm, Proffie, I3).
=> All.In.One Chassis: korbanth-owk3-padawan-chassis

ECO Chassis or PIY File

Prices: Check the links below
Install Level: Beginner
– For 18650 battery, 2.1mm recharge port, 28mm bass speaker, for ProffieBoard, NB, Prizm or Universal.
=> ECO Chassis: goth-3d-korbanth-owk3-fdm-eco-chassis
=> PIY File: goth-3d-korbanth-owk3-fdm-chassis-stl-file

2- Additional chassis parts:
Most of the chassis parts needed for our chassis are available at The Saber Armory.
Local hobby stores or online store (as well as eBay) are a good source for parts.
You can also be inventive and add any custom parts, wire mesh, paint job or else to your chassis to give it an unique look!

3- DIY empty hilts:

 Available on Korbanth website

4- Electronic components and blades:
Saber electronic components are basically more or less similar from one saber to another. You’ll need a main Led, a Battery, a recharge port, one or two switches, a soundboard, accent leds, a speaker and wires. Then the blade is the last part of your saber, they are usually made from PolyCarbonate tubes + tip.
You can find most of what you’ll need at The Saber Armory. Some components can also be found at The Saber Bay on Etsy. Local electronic shops or online stores like Digikey are also a good source.

 

Loading...
Facebook Messenger for Wordpress