GRAFLEX SALES!

We have 4 Graflex bundles (hilt + Mentor Chassis) to sell, and some misc parts for Graflex as well.
Browse down for details!

Order request by email: Please enable JavaScript

Conditions:

Please put in subject “GRAFLEX SALES”
In the mail, point out the item(s) you want to buy, your paypal address for invoicing and your physical address for shipping.

Answer to mails will take several days as we proceed in order of reception, don’t worry.
These discount prices don’t include shipping and Paypal Fees, to be quoted according to recipient location and eventual combined shipping. These costs will appear in the Paypal invoice directly (usually $20 for shipping in Europe, and $40 worldwide, + 3.5% PP fees).
Please make sure to understand what you’re buying, all these discounted sales are final and return are not possible.
Shipping will take 2 to 3 weeks.

Misc parts


– 6 set of ANH grip from Graflex 2.0 kits – $10 for all
– 9 glass eye retention screw (TGS) – $45 for all
– 8 red button rention screw (TGS) – $50 for all
– 12 Roman Props conversion kits  (this one) – $20 each (discount if  several bought)
– 6 Roman Props Graflex Bottom (this one) – $35 each (discount if  several bought)

Bundles

….

Back to top

.

On Hold or Sold

– Bundle 1 – $799
– Complete KR-Sabers Graflex kit (89Sabers kit) – in brand new consition except that the original blade holder has been modded to accept 4-40 threaded rods.
– Mentor chassis prototype mixing Var1 extend feature (to reveal the chassis since 89Saber Grafelx doesn’t allow full core reveal) with Var2 Neopixel capable chassis and removable battery pack. The connector use a set of brass pins rated for 10A for the neopixel wires (pins are included).
The metal parts are in brass and bronze.
It comes with 2 battery holder pack, the USB charger and the electronics components to build the charger. The pins for the battery and charge are also included.
The chassis is for Proffie/Igniter/CF9 and 28mm flat speaker (if you want CFX and/or 28mm Bass Speaker capable parts, we can order them for you at an additional discounted price).

– Bundle 3 – $599
– Maker Props Studios Steel Graflex kit.

– Mentor chassis Var1 (tri-cree install with extend capability, and rotative crystal chamber)
The metal parts are in steel, brass and bronze.
The motor and pins are included.
The grips are included.
The chassis is for CF9 + CEx and 28mm flat speaker (if you want CFX or Proffie, and/or 28mm Bass Speaker capable parts, we can order them for you at an additional discounted price).

– Bundle 4 – $1499
– Vintage Graflex Flashgun in  good condition (see pictures). Conversion has been started on it with care (bunny pin sanded with no mark on the pin holder). The vintage parts have been ket to build the blade holder and blade plug with them.

The clamp is left to be cleaned.
– Mentor Chassis Var2 (for Neopixel install with removable battery pack).
The metal parts are all brass and bronze. The tubes and brass sleeve of the crystal chamber are included.
The chassis is for Proffie/Igniter/CF9 and 28mm flat speaker (if you want CFX and/or 28mm Bass Speaker capable parts, we can order them for you at an additional discounted price).
It comes with 1 battery holder pack, the USB charger and the electronics components to build the charger. The pins for the battery and charger are also included.

– Bundle 2 – $999
– Vintage Graflex Flashgun in pretty good condition (see pictures)
– Mentor Chassis Var2 (for Neopixel install with removable battery pack).
The metal parts are a mix of steel, brass and bronze.
The chassis is for CFX and 28mm bass Speaker.
It comes with 2 battery holder pack, the USB charger and the electronics components to build the charger. The pins for the battery and charger are also included.
The chassis is for the NerfworXlab Master Blade Holder (sold by Solo’s Hold) – not included.

Back to top

Loading...
Facebook Messenger for Wordpress