Terms & Conditions
Promo code CYBERMON is good for 10% off on your next order of at least $25 USD before taxes and VAT. Code is valid for a maximum discount of $100 USD per order before taxes and VAT and a maximum use of 1 per customer. Applies to all materials except sandstone, platinum, silver, gold, brass, gold plated brass, copper, rhodium plated brass, and bronze. Code cannot be combined with other discounts or offer codes. No cash value. Code is valid from December 2, 2019 beginning 12:00am EST and expires on December 4, 2019 at 3:00am EST.
Another round of great deals this year, check them out!
We’ll update this page with each item availability status.
As usual, first ask first serve basis.
Answer to mails will take several days as we proceed in order of reception, don’t worry.
Payment by Paypal only. Prices doesn’t include shipping, to be quoted according to recipient location and eventual combined shipping (typical shipping in Europe around $20 and Wordwide around $35). Shipping cost will appear in the Paypal invoice directly. Also note that VAT will be applicable for EU customers.
Please make sure to understand what you’re buying, all these discounted sales are final and return are not possible.
Shipping will take 2 to 3 weeks.
– NEC Igniter 3 + X-Drive
Quant: 1 New – Unit Price: $50
– Teensy Saber
Quant: 1 New (No SD) – Unit Price: $20
– Korbanth MPP2.0 (fully installed)
In ESB setup, installed with our Sith Master chassis – NB4, RRB Tri-Cree main led (Red and Orange blade colors), 18650 battery, 2.1mm recharge Port easily accessible through the pommel. Also comes with KR-Sabers MPP blade plug and accuracy clamp parts. Optional 7/8 blade available (+$20).
Check the video demo here.
Good state, only displayed – $380
– Hasbro – Maul FX custom conversion project
Each saber has been cut in the middle, and a custom tube was to be machined for a reveal core. We never found the time to continue working on this one. The sale includes, the hasbro hilts, pommels and coupler, 2 TCSS conversion blade holders, 2 machined cores (to be machined further for reveal), 2 red button switches (Parks). Finishing this project would require tolling like lathe and mill.
State as shown – $100
– Korbanth Graflex2.5
The hilt is new. Contains accuracy parts (accurate blade holder and side tab screws, accurate beer tab, brass contacts, pommel cap, accurate red buttons), 7/8 heatsink and blade plug.
New – $150
– Helv’tica Revan
The hilt is new but the country of origin customs badly opened the package with sharp knife and there is a slice visible on the body and a small cuff on the pommel. A good candidate for weathering. See pictures.
Blem – $240 (half of the original price paid $480)